Manualshelf

Users Manual Part 2

ManualsBrandsSOCOMEC ManualsElectronicsMultipoint Display
12345678910
40 EN
DIRIS Digiware D-50 & D-70 - 548088C - SOCOMEC
10.2.2. “Protocols” tab
Once the system is fully congured to visualise measurements and consumption on WEBVIEW-M, the communication
protocols which will be used by the D-50/D-70 display to exchange data with an external supervisor (SCADA, Energy
Management System, etc.) can be congured from the “Protocols” tab.
• Network Conguration
This tab allows you to modify the gateway’s IP conguration:
After modifying those parameters, a reboot of the D-50/D-70 display is necessary.