Users Manual Part 2

59EN
DIRIS Digiware D-50 & D-70 - 548088C - SOCOMEC
Annex I - 6. SNMP conguration via Easy Cong System
After logging in to Easy Cong System on the DIRIS Digiware D-50 / D-70, you can nd the SNMP settings in the SNMP
menu, under SNMP settings:
• Community conguration SNMP V1 & V2:
- SNMP V1 Read Community: Read-only community string for SNMP v1. Default community string is “public”. It
allows a manager to retrieve read-only data from a device connected to the DIRIS Digiware D-50 / D-70.
- SNMP V1 Read/Write Community: Read-Write community string for SNMP v1. Default Read/Write community
string is “private”. It allows a manager to write (ex: position of a Digital output) to a device connected to the DIRIS
Digiware D-50 / D-70.
- Trap Community: The Trap community string allows the manager to receive notications in case of an event and/
or alarm.
- SNMP V2 Read Community: Read-only community string for SNMP v2. Default community string is “publicV2”.
It allows a manager to retrieve read-only data from a device connected to the DIRIS Digiware D-50 / D-70.
- SNMP V2 Read/Write Community: Read-Write community string for SNMP v2. Default Read/Write community
string is “privateV2”. It allows a manager to change a setting (ex: position of a Digital output) in a device
connected to the DIRIS Digiware D-50 / D-70.
• SNMP V3 conguration:
- SNMP V3 Authentication Protocol: If SNPM v3 is activated, you can choose an authentication protocol (MD5 or
SHA) to hash your password. For no authentication, select “None”.
- SNMP V3 Encryption Protocol: Choose between DES or AES privacy protocols for the encryption of data
messages. For no encryption, select “None”.
- SNMP V3 Read Username: Username enabling authentication for read-only functions.
- SNMP V3 Read/Write Username: Username enabling authentication for read and write functions.
- SNMP V3 Read Password: Password (also passphrase) accompanying the authentication and privacy
protocols, and allowing read-only functions. The length of the Read-only authentication & privacy password must
be between 8 and 16 characters.
- SNMP V3 Read/Write password: Password (also called passphrase) accompanying the authentication and
privacy protocols and allowing read and write functions. The length of the Read-Write authentication & privacy
password must be between 8 and 16 characters.
- Trap conguration: Choose to deactivate or activate the traps. If activated, you can choose to broadcast trap
notications to all supervisers on the network or to notify only specic host stations (up to 2).
- Trap Host 1 IP: Enter the IP address of the 1st host station which will receive trap notications.
- Trap Host 1 port: Enter the port used to send traps for the 1st host station.
- Trap Host 2 IP: Address: enter the IP address of the 2nd host station which will receive trap notications.
- Trap Host 2 port: Enter the port used to send traps for the 2nd host station.
- Trap notication cycle: Enter the time after which a trap reminder will be sent for active alarms. By default, it is
set to 60min.