User Guide

Connect Device in Basic Mode

In this mode the scanner functions and communicates similar to a

keyboard. Therefore, the scanner will work with Notes, and any other

application that supports an active cursor.

1. Power on the scanner. Make sure the scanner is

discoverable (unpaired).

2. Go to Settings > Bluetooth.

3. Make sure the Bluetooth is “On” and scan for devices.

4. In the list of found devices, tap S700 [xxxxxx] to Pair.

5. The scanner will connect to the host device.

6. The scanner will beep once after it has connected.

*If you have trouble connecting or pairing with host device, turn host

device’s Bluetooh o/on, and/or perform factory reset on the scanner

(see page 21).

Now you are ready to scan barcodes!

BASIC MODE