Owners manual

ADvance (iOS) MODE

3. Turn on Bluetooth on the Apple device. Go to Settings > Bluetooth.

A Bluetooth Devices search will begin.

4. Tap Socket 7Xi[xxxxxx] in the list of Devices found. After a few

seconds the “Not Paired” status will change to “Connected” or

“Paired” and the CHS Blue LED will blink every 3 seconds conrming

the connection.

Note: The characters in brackets are the last 6 characters of the

Bluetooth Address. The full Bluetooth address is printed on the Product

label.

5. Launch your Scanner-enabled Application. The CHS will beep once

indicating that it is connected to the appropriate application.

Now you are ready to scan barcodes.