Owners manual
18
Advance (iOS) MODE
Connect Apple iOS device in Advance (iOS) Mode
Please check with your scanner application vendor or visit
www.socketmobile.com/appstore to conrm your Scanner-enabled
application supports the CHS.
If you are using the CHS with an Apple iOS device and a Scanner-enabled
Application that does not provide instructions how to connect with the
CHS, please use the following steps.
1. Power on the CHS. Make sure the CHS is discoverable (unpaired).
2. To change the prole to Advance (iOS) mode scan this barcode. The
CHS will beep 3 times.
Use with iPad, iPod touch, and iPhones.










