Owners manual

WINDOWS PC

To pair the CHS with the PC using EZ Pair:

1. Power on the CHS. Make sure the CHS is available to be connected to

Bluetooth (unpaired).

2. Launch SocketScan 10 and click on the SocketScan 10 icon in the task

tray. In the pop-up menu, click Socket EZ Pair.

3. Scan the barcode on the screen to switch set your scanner in SPP

mode. The CHS will beep 3 times.

4. Click 2D Scanner accordingly.

5. Scan the barcode that appears on the screen.

6. The PC will automatically try to pair with the CHS. If prompted to

allow the pairing, click Yes. If prompted for a passkey, enter 0000

(four zeroes).

7. After the CHS connects, it will beep once. Close Socket EZ Pair.

8. If you are connecting a scanner which is not registered, a CHS

registration icon will appear on top of the screen. Follow the

instructions to register your CHS. Socket Mobile highly recommends

that all customers register their products, but registration is not

necessary.

9. The task tray icon will change to indicate the connection.

Now you are ready to scan barcodes.

Note: If you are unable to scan the barcode on screen, please use

the alternative Bluetooth Method to connect the CHS; refer to the

User Guide at Socket Mobile’s support web page.