Owners manual

SPP MODE

Connect Android or Windows Mobile Device:

Highly recommended, allows two-way communications with Android,

Windows and Mobile Devices. SocketScan 10 software installation re-

quired.

1. Power on the CHS and scan this barcode. The CHS will beep 3 times.

Make sure the CHS is discoverable (unpaired).

2. Turn Bluetooth on for your device. Go to Settings > Bluetooth. A

Bluetooth Devices search will begin.

3. Tap Socket 7Xi[xxxxxx] in the list of Devices found. After a few

seconds the “Not Paired” status will change to “Connected” or

“Paired” and the CHS Blue LED will start blinking every 3 seconds

conrming the connection.

You are now ready to scan barcodes using your Scanner-enabled

Application.