Manualshelf

Owners manual

ManualsBrandsSOCKET ManualsComputers & LaptopsSocket Mobile CX3312-1532 CHS 7Qi Series 7 Bluetooth Cordless Hand Scanner - 15.98" Scan Distance - 1D, 2D - Imager - Omni-direc
12345678910
BASIC(HID) MODE
Android: Connect Android Device in Basic(HID) Mode
1. Power on the CHS. Make sure the CHS is discoverable (unpaired).
2. Touch Home | Menu | Settings | Wireless & Networks |
Bluetooth settings
3. Make sure the device has Bluetooth “On” and scan for devices.
4. In the list of found devices, select Socket 7Xi [xxxxxx]. Tap Pair.
5. The CHS will connect to the Android device.
6. The CHS will beep once after it has connected and is ready to scan
barcodes.
Apple: Connect Apple iOS Device or Mac OS Device Basic (HID)
Mode
In this mode the scanner works and behaves just like a keyboard.
Therefore, CHS will work with Safari, Notes, and any other applications
that supports an active cursor.
1. Power on the CHS. Make sure the CHS is discoverable (unpaired).
2. Start a Bluetooth device search.
• iOS: Tap Settings | General | Bluetooth. Turn on Bluetooth. A
Bluetooth device search will begin.
• Mac OS: Click System Preferences | Internet & Wireless | Bluetooth.
In Bluetooth preferences, select the On checkbox. Click Set up New
Device... A Bluetooth device search will begin.
3. In the device list, tap on CHS [xxxxxx]. Tap Pair.
4. The CHS will connect to the Apple device.
5. The CHS will beep once after it has connected and is ready to scan
barcodes.
10