User Guide

Insert the Batteries
Unlock the Battery door by using
a thin coin to turn the lock under
the scanner to a horizontal position
(turn 90 degrees).
Install the batteries in their correct position
as indicated by the +/- symbols.
Important: Only use NiMH
Rechargeable batteries. Do NOT
use Alkaline Batteries
Attach the Lanyard (optional)
Detach the string loop of the tether
from the lanyard. Then feed the
string loop through the slot in the
Twist-lock and then through the end of the
loop. Pull tight so the string loop is secure
to the Twist-lock, Reattach the string loop
to the tether from the Lanyard.
If desired, attach the tether to a lanyard or
belt.
4
SCANNER SETUP