User Guide

Automatic Reconnections

After you power on the scanner, it will automatically try to connect to the last

device it was connected to.

• Make sure the device is in range with Bluetooth On.

• If using Basic Mode (HID), pressing the trigger button will enforce the con-

nection.

• If using Basic Mode for iOS, make sure the Scanner-enabled Application is

active.

• If using Application Mode (SPP), make sure SocketScan 10 software or an ap-

plication developed with SocketScan 10 SDK is running.

Make sure the device is on and in range. While the scanner is attempting to con-

nect, the Blue LED will blink every second.

• If a connection is made, the Blue LED will blink every 3 seconds.

• If a connection is not made after 30 attempts, the scanner will emit a long

beep.

BLUETOOTH CONNECTION