User Guide

Note: This procedure will put the scanner in discoverable mode.
Step 1: Unpairing the Scanner: Delete the Bluetooth Pairing
If the scanner is paired with a device, unpair it before trying to connect to
a different device.
a. Power on the scanner.
b. Press and hold down the trigger button.
c. Press and hold down the power button.
d. After you hear 3 beeps, release both buttons.
The scanner will unpair and automatically power off. The next time you power on
the scanner, it will be discoverable.
Step 2: Remove the Scanner from the Bluetooth list on the host device
Important: Both steps above must be done to complete the unpairing.
BLUETOOTH UNPAIRING
18