User Guide

APPLICATION MODE (MFI-SPP) FOR iOS

Connect Apple device in Application Mode (MFi-SP) for iOS:

Please check with your scanner application vendor or visit

www.socketmobile.com/appstore to confirm your Scanner-enabled

application supports the scanner.

If you are using the scanner with an Apple iOS device and a Scanner-enabled Ap-

plication that does not provide instructions how to connect with the scanner,

please use the following steps.

1. Power on the scanner. Make sure the scanner is discoverable (unpaired).

2. To change the profile to Application Mode (MFi-SPP) for iOS, scan this barcode.

The scanner will beep 3 times.

Use with iPad, iPod touch, and iPhones.

(Continue on page 17)