User Guide

WINDOWS PC
15
To pair the Scanner with the PC using EZ Pair:
1. Power on the scanner. Make sure the scanner is discoverable (unpaired).
2. Launch SocketScan 10 and click on the SocketScan 10 icon in the task tray. In
the pop-up menu, click Socket EZ Pair.
3. Scan the barcode on the screen to switch set your scanner in Application Mode
(SPP). The scanner will beep 3 times.
4. Click 1D Scanner accordingly.
5. Scan the barcode that appears on the screen.
6. The PC will automatically try to pair with the scanner. If prompted to allow
the pairing, click Yes. If prompted for a passkey, enter 0000 (four zeroes).
7. After the scanner connects, it will beep once. Close Socket EZ Pair.
8. If you are connecting a scanner which is not registered, a scanner registration
icon will appear on top of the screen. Follow the instructions to register your
scanner. Socket Mobile highly recommends that all customers register their
products for future updates, but registration is not necessary.
9. The task tray icon will change to indicate the connection.
Now you are ready to scan barcodes.