User Guide

APPLICATION MODE (SPP)
13
Connect Android device in Application Mode (SPP) using EZ Pair
1. Go to Google Play Store, search for “SocketScan”.
2. Download & install. Follow the on screen instructions.
Getting Started
3. Follow the on screen instructions.
4. Tap on screen the ON SCREEN button.
5. Tap on screen the 1D SCANNER button.
6. Scan the barcode on the device screen. Wait a few seconds. The scanner will
beep 3 times indicating it has accepted the command to connect to your
device.
7. Whennotiedofapairingrequest,swipethenoticationicondown,thentap
Pairing request.
8. On the next screen, tap Pair.
9. The scanner will beep once to indicate connected state and is ready to scan
barcodes. Tap Back to close Socket EZ Pair.
10.If you are connecting a scanner which is not registered, a scanner registration
icon will appear on top of the screen. Swipe the icon down to open the
registration screen. Follow the instructions to register your Scanner. Socket
Mobile highly recommends that all customers register their products, but
registration is optional.
Now you are ready to scan barcodes!