User Guide

Android: Connect Android Device in Basic Mode (HID)

1. Power on the scanner. Make sure the scanner is discoverable (unpaired).

2. Touch Home | Menu | Settings | Wireless & Networks | Bluetooth

settings

3. Make sure the device has Bluetooth “On”. Scan for devices.

4. In the list of found devices, select Socket CHS [xxxxxx]. Tap Pair.

5. The scanner will connect to the Android device.

6. The scanner will beep once after it has connected and is ready to scan bar-

codes.

Apple: Connect Apple iOS Device or Mac OS Device in

Basic Mode (HID)

In this mode, the scanner interacts with the device like a keyboard.

Therefore, the scanner will work with Safari, Notes, and any other applications

that supports an active cursor.

1. Power on the scanner. Make sure the scanner is discoverable (unpaired).

2. Start a Bluetooth device search.

• iOS: Tap Settings | General | Bluetooth. Turn on Bluetooth. A Bluetooth

device search will begin.

• Mac OS: Click System Preferences | Internet & Wireless | Bluetooth. In Blue-

tooth preferences, select the “On” checkbox. Click Set up New Device... A

Bluetooth device search will begin.

BASIC MODE (HID)