User's Manual

To verify if the installation of the driver was completed

successfully:

1. Soft reset the PDA (push Soft-reset Button of PDA)

* Some PDA may not require resetting but it should be safer to reset.

2. Insert the WL6207 into the PDA

3. Check the LED on the WL6207. If steady

Blue light is seen, the WL6207 is active.

4. (Optional) To check the quality of the network connection, you should use the WL6207 configuration

utility program as described in the next section

WL6 2 0 7 CON FI GU RAT I ON U T I LI T Y

1. Click Install Utility to perform utility installation.

Ste p 2

2. Click “YES” to proceed the installation.