USB Bluetooth 2.
7/2007 Document # 6410-00xxx A Copyright Notice Copyright © 2007 Socket Communications, Inc. dba Socket Mobile, Inc. All rights reserved. Socket, the Socket logo and Battery Friendly are registered trademarks of Socket Communications, Inc. dba Socket Mobile, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Socket Mobile, Inc. is under license. All other brand and product names are trademarks of their respective holders.
Table of Contents COPYRIGHT NOTICE 2 1 | INTRODUCTION 4 2 | INSTALLATION INSTRUCTIONS 5 APPENDIX A SPECIFICATIONS 6 APPENDIX B SAFETY AND USAGE TIPS 7 APPENDIX C TECHNICAL SUPPORT 9 LIMITED WARRANTY 10 REGULATORY COMPLIANCE 11 3
1 | Introduction The Class 1 USB Adapter with Bluetooth Wireless technology is a mobile USB-to-AC adapter to form a Bluetooth beacon. System Requirements • USB-to-AC adapter Product Registration Socket highly recommends that all customers register their Socket products. Registered users receive the following benefits: • Priority for technical support • Special offers for future products and product upgrades • The latest new product information To register your product online, visit: www.socketmobile.
2 | Installation Instructions STEP 1: Insert into USB-to-AC Adapter Insert the USB Bluetooth 2.0 Adapter into the USB port of a USB-to-AC Adapter as shown. STEP 2: Insert into Wall Outlet Insert the combined unit into an AC wall outlet. The LED will turn orange to indicate that the USB Adapter is on.
Appendix A Specifications Physical Characteristics: L x W x H: 2.7 x 0.79 x 0.34 inches (69 x 20 x 8.6 mm) Weight: 0.39 oz (11 g) Power Consumption: Requirement: 5 VDC Maximum: 200 mA (normal operation) Environmental Conditions: Operating Temperature: 0 to +45° C (ambient) Storage Temperature: -20 to +45° C (ambient) Operating Humidity: 90% maximum (non-condensing) Storage Humidity: 90% maximum (non-condensing) Bluetooth Characteristics Frequency Range: Bluetooth 2.
Appendix B Safety and Usage Tips About Bluetooth and Health Bluetooth wireless technology allows you to use short-range radio signals to connect a variety of devices, such as mobile phones, Pocket PCs, notebook computers, printers, LAN access points, and many other devices at home or work. These radio signals replace the cables that have traditionally connected these devices. Bluetooth enabled products have small radio transmitters and receivers. Output power is normally very low.
Antenna Care Do not place a metallic shield around your adapter since it will reduce the radio transmission efficiency. Efficient Use For optimum performance, please make sure that there is no metal surrounding your adapter. Driving RF energy may affect some electronic systems in motor vehicles, such as car stereo, safety equipment, etc. Check with your vehicle manufacturer’s representative to be sure that your adapter will not affect the electronic system in your vehicle.
Appendix C Technical Support If you have trouble installing or using the Class 1 USB Adapter, Socket has two resources to help you: Socket Online Support Socket Online Support is an interactive technical support program that provides immediate service and is the best place to start for technical support. To access SOS, visit: www.socketmobile.com/support. Click on the SOS icon. Live Technical Support IMPORTANT! To obtain technical support, you must first register your product online at www.socketmobile.
Limited Warranty Socket Communications Incorporated (Socket) warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. Incompatibility is not a defect covered by Socket’s warranty. During the warranty period, Socket will, at its option, repair or replace the defective product at no charge when furnished with proof of retail purchase, provided that you deliver the product to Socket or to an authorized Socket Service Center.
Regulatory Compliance Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1).this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
7/2006 Printed in U.S.A.
