User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for Windows Mobile
- STEP 1: Uninstall Other Scanning Software
- STEP 2: Install the Software
- STEP 3: Insert the CF RFID Reader-Scan Card
- STEP 4: Assign Trigger Button(s)
- STEP 5: Read Data into a Windows Program
- OPTIONAL: Configure RFID
- OPTIONAL: Configure Prefix/Suffixes
- OPTIONAL: Configure Sounds
- OPTIONAL: Configure Bar Code Symbologies
- OPTIONAL: Use SocketScan Trigger
- OPTIONAL: View Version Information
- 3 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Bar Code Label Specifications
- Appendix D Class 1 vs. Class 2 Laser Scanners
- Appendix E Enabling or Disabling Symbologies
- Appendix F Laser Decode Zone
- Appendix G Troubleshooting
- Appendix H Technical Support
- Limited Warranty
- Regulatory Compliance
Appendix F
Laser Decode Zone
The decode zones for the Class 1 and Class 2 lasers in the CF RFID Reader-
Scan Card are shown below. The minimum element width (“X Dimension”
or bar code “size”) is the width in thousandths of an inch (mils) of the
narrowest element (bar or space) in the symbol. The figures shown are the
typical scanning distances (depths of field) for selected bar code sizes. The
maximum usable length of a bar code symbol (Width of Field) at any given
range is also shown below.
Class 1 Laser Decode Zone
50 | APPENDIX E: DECODE ZONE