User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for Windows Mobile
- STEP 1: Uninstall Other Scanning Software
- STEP 2: Install the Software
- STEP 3: Insert the CF RFID Reader-Scan Card
- STEP 4: Assign Trigger Button(s)
- STEP 5: Read Data into a Windows Program
- OPTIONAL: Configure RFID
- OPTIONAL: Configure Prefix/Suffixes
- OPTIONAL: Configure Sounds
- OPTIONAL: Configure Bar Code Symbologies
- OPTIONAL: Use SocketScan Trigger
- OPTIONAL: View Version Information
- 3 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Bar Code Label Specifications
- Appendix D Class 1 vs. Class 2 Laser Scanners
- Appendix E Enabling or Disabling Symbologies
- Appendix F Laser Decode Zone
- Appendix G Troubleshooting
- Appendix H Technical Support
- Limited Warranty
- Regulatory Compliance
34
Appendix A
Product Specifications
Physical Characteristics
CompactFlash Card Size: 1.43 x 1.68 x 0.20 inches (36 x 42.7 x 5.0 mm)
Weight: 1.6 oz. (45 g)
Scanner Head Size: 1.76 x 1.93 x 0.82 inches (45 x 49 x 21 mm)
Power Consumption (3.3 V):
Idle: 11 mA
RFID Reading/Writing: 52 mA
Bar Code Scanning: 72 mA
Also operates at 5 V
Environmental:
Operating Temperature: 10 to +50°C (-4 to +122°F)
Storage Temperature: -40 to +70°C (-40 to +158°F)
Humidity: 5-95% RH non-condensing
Compatibility: Windows COM port
Operating System Support: Windows CE.NET v4.2 (Windows Mobile)
Certification: FCC: Part 15, Class B, CE: EN55024:1998, C-TICK: s.182
RFID Characteristics:
Frequency: 13.56 MHz (HF)
Maximum Read Range: 2.0 inches, depending on tag antenna size
HF RFID Tags Supported
ISO15693: ICode SL2, LRI512, my-d, Tag-It HF-I
Proprietary: ICode 1, PicoTag (tag ID only), Tag-It HF, GemWave (tag ID only)
Scanner Characteristics: Laser Classes Available:
Version 6M: Laser Class 1 Version 6P: Laser Class 2