User's Manual
Table Of Contents
- Copyright Notice
- 1 | Introduction
- 2 | Setup for Windows Mobile
- STEP 1: Uninstall Other Scanning Software
- STEP 2: Install the Software
- STEP 3: Insert the CF RFID Reader-Scan Card
- STEP 4: Assign Trigger Button(s)
- STEP 5: Read Data into a Windows Program
- OPTIONAL: Configure RFID
- OPTIONAL: Configure Prefix/Suffixes
- OPTIONAL: Configure Sounds
- OPTIONAL: Configure Bar Code Symbologies
- OPTIONAL: Use SocketScan Trigger
- OPTIONAL: View Version Information
- 3 | RFID Demo
- Appendix A Product Specifications
- Appendix B HF RFID Standards and Tag Descriptions
- Appendix C Bar Code Label Specifications
- Appendix D Class 1 vs. Class 2 Laser Scanners
- Appendix E Enabling or Disabling Symbologies
- Appendix F Laser Decode Zone
- Appendix G Troubleshooting
- Appendix H Technical Support
- Limited Warranty
- Regulatory Compliance
OPTIONAL: Configure Bar Code Symbologies
SocketScan provides an applet that makes it easy to modify which bar code
symbologies you want the scanner to recognize and attempt to decode. By
default, the scanner is set to recognize several of the most common
symbologies.
1. Tap on the SocketScan icon at the bottom of the Today screen.
2. In the pop-up menu, tap Symbology Selector. If SocketScan is currently
configured for more than one scanner, then tap In-Hand Scanner in the
submenu that appears.
Note: The Connect CHS option will only appear if you have enabled
SocketScan for the Cordless Hand Scanner in the Socket CHS
configuration utility.
3. In the screen that appears, use the checkboxes to enable/disable
symbologies. Tap ok.
Note:
• Symbologies not supported by the CF RFID Reader-Scan Card will be
grayed out.
• Enabling all possible symbologies will make the decode process
slightly longer.
22