User's Manual

OPTIONAL: Configure RFID
This utility allows you to configure what kinds of data are returned after
reading RFID tags.
Note: These settings are only used with the SocketScan keyboard wedge programs
and Scan Demo.
1. Tap Start | Settings | System tab | RFID Setup.
2. Enter your desired settings, then tap ok.
Trigger mode:
• Tag ID only: Select to read only the tag ID.
• Read Data Only: Select to read only data from the tag memory.
• Tag ID & Read Data: Select to read both the tag ID and tag memory.
Starting block: If you selected a Read Data option in the drop-down
menu, enter the number of the first block you want to begin reading.
Number of blocks: If you selected a Read Data option in the drop-down
menu, enter the number of blocks you want to read.
Read error string: Enter what string you want your application to display in
case the CF RFID Reader-Scan Card has problems reading the tag data.
Tag type: Select the type of RFID tag you would like to read. The Auto
Detect setting enables all tag types to be read.
Note: Selecting a specific tag may result in a longer read range and faster read.
Inventory mode: Check to enable inventory mode. The CF RFID Reader-Scan Card
will read all of the tags present in an RFID field, if supported by the tag type.
Display tag ID prefix: Check to display the RFID tag ID prefix with each
tag ID. The prefix indicates the tag type.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 19