User's Manual

CHAPTER 1: INTRODUCTION 5

System Requirements

Note: For information about support for MontaVista Linux and Real-Time

Operating Systems (RTOS), please contact the Socket OEM Group at

www.socketmobile.com/contact

Minimum device requirements for Go Wi-Fi! E300, P300 or P300x

(SD cards):

• Windows Mobile 2003, 2003SE or 5.0

• Available SDIO slot

• For Windows Mobile 2003/2003SE, SDIO Now! software from

BSQUARE is required in ROM

• Software installation requires a host computer with either Windows

Vista or ActiveSync 4.0 or greater. Alternatively, advanced users can

install a CAB file.

Minimum device requirements for Go Wi-Fi! E500, P500 or P500x

(CF cards):

• Windows Mobile 2003, 2003SE or 5.0

• Available CF or PC Card slot (PC Card adapter required for PC slot)

• Software installation requires a host computer with either Windows

Vista or ActiveSync 4.0 or greater. Alternatively, advanced users can

install a CAB file.

• The Go Wi-Fi! E500 only connects to access points or radios that use

long preamble. Every 802.11b/g access point supports long preamble,

and most are configured this way by default.

Product Registration

Socket Mobile recommends that all customers register their Socket Mobile

products. Registered users receive the following benefits:

• Priority for technical support

• Special offers for future products and product upgrades

• The latest new product information

Software updates: www.socketmobile.com/support/downloads