- Ethernet Blaster Communications Cable User Guide

3–4 Altera Corporation
EthernetBlaster Communications Cable User Guide December 2004
Operating Conditions
Figure 3–3. 10-Pin Male Header Dimensions
Operating
Conditions
Tables 3–3 through 3–5 summarize the maximum ratings, recommended
operating conditions, and DC operating conditions for the cable.
0.025 Sq
.
0.235
0.100
0.100
Dimensions are shown in inches.
Top View Side View
Table 3–3. EthernetBlaster Cable Absolute Maximum Ratings
Symbol Parameter Conditions Min Max Unit
V
CC(TARGET)
Target supply voltage With respect to ground –0.3 5.5 V
V
CC(SYS)
System supply voltage With respect to ground –0.5 14.0 V
I
I
Input current
TDO or dataout
–10.0 10.0 mA
I
o
Output current
TCK, TMS, TDI, nCS, nCE
–10.0 10.0 mA
Table 3–4. EthernetBlaster Cable Recommended Operating Conditions
Symbol Parameter Conditions Min Max Unit
V
CC(TARGET)
Target supply voltage, 5.0-V operation 4.75 5.25 V
Target supply voltage, 3.3-V operation 3.0 3.6 V
Target supply voltage, 2.5-V operation 2.375 2.625 V
Target supply voltage, 1.8-V operation 1.71 1.89 V
Target supply voltage, 1.5-V operation 1.43 1.57 V