- Ethernet Blaster Communications Cable User Guide

3–2 Altera Corporation
EthernetBlaster Communications Cable User Guide December 2004
EthernetBlaster Hardware Connections
EthernetBlaster Ethernet Jack Connection
The Ethernet cable Ethernet jack connects to the EthernetBlaster
communications cable Ethernet port. The Ethernet jack pin number
designations are shown in Figure 3–1 below.
Figure 3–1. Ethernet Jack Pin Number Designations
EthernetBlaster Plug Connection
The 10-pin female plug connects to a 10-pin male header on the circuit
board containing the target device. See Figure 3–2.
Figure 3–2. EthernetBlaseter 10-Pin Female Target-Side Plug Dimensions
Pin Signal
1
2
3
4
5
6
7
8
TxData +
TxData
-
RecvData +
-
-
RecvData -
-
-
81
0.250 Typ.
0.700 Typ.
0.425 Typ.
0.100 Sq.
10
9
8
7
6
5
4
3
2
1
0.025 Sq.
Dimensions are shown in inches. Spacing between pin centers is 0.1 inches.