- Ethernet Blaster Communications Cable User Guide

Altera Corporation 2–3
December 2004 EthernetBlaster Communications Cable User Guide
EthernetBlaster Communications Cable Administration
The new password takes effect immediately when logging back into
the administrative web page.
1 The EthernetBlaster communications cable does not restart
when the administrative password is reset.
Changing the Quartus II Remote Connection Password
To change the Quartus II remote connection password, follow the
directions below:
1. Open and log into the EthernetBlaster administrative web page in
your browser.
1 See Chapter 1, “Setup,” for instructions on accessing the
administrative web page using your specific connection.
2. Click the Change EthernetBlaster Settings tab. See Figure 2–2
below.
Figure 2–2. Change Quartus II Remote Connection Password Page
3. Enter the new Quartus II remote connection password in the New
Password field and again in the Confirm New Password field. Click
Apply.