Quick Installation Guide Version 1.
Copyright© 2002 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer. Under no circumstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequen-tial damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Warning Single Board Computers and their components contain very delicate Integrated Circuits (IC). To protect the Single Board Computer and its components against damage from static electricity, you should always follow the following precautions when handling it : 1. Disconnect your Single Board Computer from the power source when you want to work on the inside 2. Hold the board by the edges and try not to touch the IC chips, leads or circuitry 3.
Specifications General Specifications • CPU : Intel Ultra Low Voltage Embedded Celeron 400MHz to Pentium3 933MHz processor with FSB 100/133 MHz EBGA package.
Network Interface Controller • Chipset : Realtek 8100BL or 8100C, 10/100 Mbps Display Controller • Chipset : 4x AGP S3 Savage4 3D and S3 Savage 2000 2D engines integrated in VT8606 supports up to 32MB of Shared Memory • Display Type : Flat Panel and CRT displays up to 1280x1024 @ 32 bpp - Lcd interface : Flat Panel 36-bit TFT/DSTN interface - LVDS interface(PBE-1000) : Scalable Bandwidth is ranging from 25MHz~112MHz(VGA~SXGA) 18/36-bit one/two channel LVDS interface - TV-Out : Support NTSC,PAL NTSC-EIA
Packing list Before you begin installing your single board computer, please make sure that the following materials have been shipped: > 1 x EmETX-i602 EXT Embedded Intel Celeron(or PIII Tulatin) SBC > 1 x Quick Installation Guide > 1 x CD-ROM ( for driver used) > 1 x Warranty Card Ordering Codes EmETX-i602/C400 ETX Embedded Intel Celeron ULV 400MHz Single Board Computer with one SODIMM socket up to 512 MB SDRAM, CRT SVGA, One Realtek 8139CL Fast Ethernet, AC97 3D Audio.
Board Layout Top View (Front) LCD1 "Southbridge" VT82C686B Intel '01 7214A692 SL66D RJ80530KZ800512 4R3 PN133T DIMM1 RTL8139CL LCD2 Realtek S3 Board Layout Top View (Back) ETX4 ETX2 ETX3 ETX1 EmETX-i602 Quick Installation 7
Jumper/Connector Quick Reference Connectors 8 Lable Function Page LCD1 LCD TTL Connector 1 9 LCD2 LCD TTL Connector 2 9 ETX1 PCI Bus, USB, Audio 10 ETX2 ISA Bus 10 ETX3 VGA,LCD,Video,COM1,COM2,LPT,IrDA,M/K 11 ETX4 IDE1,IDE2,Ethernet,Miscellaneous 11 EmETX-i602 Quick Installation
Flat Panel VGA LCD1 Type : Onboard 40-pin Box Header (Hirose DF-40DS-1.25C) Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 Description VCC5V GND VCC3V NC FPD0 FPD2 FPD4 FPD6 FPD8 FPD10 FPD12 FPD14 FPD16 FPD18 FPD20 FPD22 GND SHFCLK M(DE) ENABLK Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Description VCC5V GND VCC3V GND FPD1 FPD3 FPD5 FPD7 FPD9 FPD11 FPD13 FPD15 FPD17 FPD19 FPD21 FPD23 GND HSYNC VSYNC ENAVEE LCD2 Type : Onboard 20-pin Box Header (Hirose DF-20DS-1.
ETX Connector ETX2 ETX1 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 10 GND PCICLK3 GND PCICLK1 REQ#3 GNT#2 REQ#2 REQ#1 GNT#0 VCC SERIRQ AD0 AD1 AD4 AD6 CBE#0 AD8 GND AD10 AD11 AD12 AD13 AD14 AD15 CBE#1 VCC PAR GPERR# PME# LOCK# TRDY# IRDY# FRAME# GND AD16 AD17 AD19 AD20 AD22 AD23 AD24 VCC AD25 AD28 AD27 AD30 PCIRST# INTC# INTA# GND GND PCICLK4 GND PCICLK2 GNT#3 3V GNT#1 3V RESERVED VCC REQ#0 3V AD2 AD3
ETX Connector ETX4 ETX3 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 GND R HSY VSY DETECT#/N.C TX2CLK# TX2CLK+ GND TX2D1+ TX2D1# GND TX1D3# TX1D3+ GND TX1D2# TX1D2+ GND TX1D0# TX1D0+ VCC N.C N.C BIASON COMP SYNC ` N.C VCC STB# N.
