User's Manual

Note: This procedure will put the Scanner in discoverable mode.

Step 1: Unpairing the Scanner: Delete the Bluetooth Pairing

If the Scanner is paired with a device, unpair it before trying to

connect to a different device.

1. Power on the Scanner.

2. Press the trigger button then then power button and hold.

3. After you hear 3 beeps, release both buttons.

The Scanner will unpair and automatically power off. The next time you

power on the Scanner, it will be discoverable.

Step 2: Remove the Scanner from the Bluetooth list on the host device

Important: Both steps above must be done to complete

the unpairing.

BLUETOOTH UNPAIRING