User's Manual

To pair the Scanner with the PC using EZ Pair:

1. Power on the Scanner. Make sure the Scanner is available to be

connected to Bluetooth (unpaired).

2. Launch SocketScan 10 and click on the SocketScan 10 icon in the task

tray. In the pop-up menu, click Socket EZ Pair.

3. Scan the barcode on the screen to switch set your scanner in

Application Mode (SPP). The Scanner will beep 3 times.

4. Click 2D Scanner accordingly.

5. Scan the barcode that appears on the screen.

6. The PC will automatically try to pair with the Scanner. If prompted

to allow the pairing, click Yes. If prompted for a passkey, enter 0000

(four zeroes).

7. After the Scanner connects, it will beep once. Close Socket EZ Pair.

8. If you are connecting a scanner which is not registered, a Scanner

registration icon will appear on top of the screen. Follow the

instructions to register your Scanner. Socket Mobile highly

recommends that all customers register their products, but

registration is not necessary.

9. The task tray icon will change to indicate the connection.

Now you are ready to scan barcodes.

Note: If you are unable to scan the barcode on screen, please use the

alternative Bluetooth Method to connect the Scanner; refer to the User

Guide at Socket Mobile’s support web page.

WINDOWS PC - APPLICATION MODE