User's Manual

Connect Android device in Application Mode (SPP)
15. Select [On screen] button.
16. On the next screen, tap on the 7Qi or 7Xi button that is appropriate
for your scanner button.
17. Scan the barcode on the screen. The Scanner will beep 3 times.
18. When notied of a pairing request, swipe the notication icon down
then tap Pairing request.
19. On the next screen, tap Pair.
20. The Scanner will beep once to indicate connected state and is ready
to scan barcodes. Tap Back to close Socket EZ Pair.
21. If you are connecting a scanner which is not registered, a Scanner
registration icon will appear on top of the screen. Swipe the icon
down to open the registration pages. Follow the instructions to
register your Scanner. Socket Mobile highly recommends that all
customers register their products, but registration is not necessary.
Now you are ready to scan barcodes!
Note: If you are unable to scan the barcode on screen, please use the
alternative Bluetooth Method to connect the Scanner; refer to the User
Guide at Socket Mobile’s support web page.
APPLICATION MODE (SPP)
19