User's Manual
Windows: Connect Windows PC as a Basic Mode (HID) Peripheral
1. Power on the Scanner and scan this barcode. The Scanner will beep 3
times.
2. Turn on Bluetooth on your PDA or PC and start a device search.
Make sure it is discoverable.
3. Select Socket Scanner. If prompted for a passkey, enter 0000
(four zeroes). If prompted to select services, select Input Device.
4. After the Scanner connects and is ready to scan barcodes, it will beep
once.
Now you are ready to scan barcodes!
To connect to a new device or use a different prole (mode) on the
same device, you must rst unpair the Scanner See page 21.
16
WINDOWS BASIC MODE (PERIPHERALS)