User's Manual

Windows: Connect Windows PC

Power on the Scanner. Make sure the Scanner is discoverable (unpaired).

1. Use your computer’s Bluetooth Settings to connect to the Scanner.

2. Open Devices and Printers and select “Add a device”.

3. In the device list, select Socket Scanner [xxxxxx]. Click Next.

4. If a passkey is requested, enter 0000 (four zeroes). Click OK.

Or Pair Now.

5. Follow the remaining screens to complete the wizard.

Note: On some computers the Scanner will have to be congured as Basic

Mode (HID) Peripheral. If not successful, scan this special barcode and

repeat the steps above.

BASIC MODE