socketmobile.com D600 USERGUIDE DURASCANTM Bluetooth® wireless technology NFC/RFID Reader & Writer Model D600 www.socketmobile.
TABLE OF CONTENTS Battery Warning Statements 27 Bluetooth Connection Modes 11 Bluetooth Device Canada 24 Bluetooth Device Europe 25 Bluetooth Device JAPAN 26 Bluetooth Device United States 23 Bluetooth ReConnection 13 Bluetooth Unpairing 12 Configuration Cards 31 Helpful Resources 20 Limited Warranty 30 Optional Charging Accessories 8 Package Contents 4 Power Adapter 7 Powering on/off 9 Product Information 5 Product Specifications 18 Regulatory Compliance 29 Safety and Handling Information 21 Scanning Tag
TABLE OF CONTENTS
PACKAGE CONTENTS DuraScan D600 Lanyard USB A to USB Type-C Cable Thank you for choosing Socket Mobile! Let’s get started! ©2017 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, and SocketScan are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license.
PRODUCT INFORMATION NFC Antenna Read Indicator Light Product label Bluetooth Light (Blue) Battery Light (Green/Yellow/Red) Trigger button Power button* Power Connector Stand Attachment Lanyard Eyelet Pins for charging cradle The D600 has a protection rating of IP54 for dust and water protection. It is also made with antimicrobial to help provide protection against bacteria. *Also used to display the on-screen keyboard in Basic Mode (iOS only).
READER SETUP Attach the Lanyard (optional) 1. 2. 3. 4. 5. Detach the string loop of the tether from the lanyard. Feed the string loop through the eyelet. Pull the tether through the string loop. Pull tight so the string loop is secure. Reattach the string loop’s tether to the lanyard.
CHARGE THE BATTERY Power Adapter Rubber Flap To open The reader must be fully charged before first use. Please allow 6 hours uninterrupted charging for the initial battery charge. Lift the rubber flap to access the power connector. • Yellow Light = Charging • Green Light = Fully charged Important: Charging from a computer USB port is not reliable and not recommended.
OPTIONAL CHARGING ACCESSORIES Available separately. Charging Cradle Charging Stand AC Power Supply International Adapters available For all optional accessories visit our Socket Store.
POWERING ON/OFF Power button Powering On: Powering Off/ Disconnecting: Press and hold down the small power button until the Battery light turns on and the reader beeps twice (low-high). Press and hold down the small power button until the reader beeps twice (high-low) and all lights turn off. The reader will power off automatically if device is not connected within 5 minutes. Reader connected to a device will power off within 2 hours if idle/inactive.
READING TAGS Tag Aim the read beam straight across the entire tag. Scanning Tags 1. Hold the reader within two inches of the card, tag or smart device 2. The card, tag, or smart device should be parallel to the D600 antenna 3. Press and hold the trigger button By default, the reader will beep, vibrate, and the read indicator will flash green to confirm a successful read.
BLUETOOTH CONNECTION MODES 11
BLUETOOTH UNPAIRING Note: This procedure will put the reader in discoverable mode. Step 1: Unpairing the reader: Delete the Bluetooth Pairing If the reader is paired with a device, unpair it before trying to connect to a different device. 1. Power on the reader. 2. Press the trigger button then power button and hold both until you hear 3 beeps. The reader will unpair and automatically power off. The next time you power on the reader, it will be discoverable.
BLUETOOTH RECONNECTION Automatic Reconnections Each time you power on the reader, it will automatically try to connect to the last device it was connected to. • Make sure the device is in range with Bluetooth turned on. • Pressing the trigger button will initiate the attempts to connect. • If using Application Mode, make sure the Reader-enabled Application is launched or running. • If a connection is made, the blue light will stop blinking and turn solid.
STATUS INDICATORS Battery Charging when plugged into Power Supply Battery Status When not connected to power supply LED Activity Meaning Blinking Yellow Charging the battery Solid Green Battery is 100% full LED Activity Meaning Solid Green Battery capacity from 100% to 25% Solid Yellow Battery capacity from 25% to 10% Solid Red Warning - Battery capacity below 10% Blinking Red Charge immediately! The battery level is critically low.
STATUS INDICATORS (CONTINUED) Bluetooth Bluetooth Scan/Read Scan/Read LED Activity Meaning Quick Blinking Blue (2 blinks every second) Discoverable - waiting for a host Bluetooth connection. Slow Blinking Blue (1 blink every second) Attempting to connect to a paired device. Searching the last known Host. Note: Will STOP attempting after approx. 1 minute. No Light - No Activity Reader has attempted to connect and failed. Press trigger button to try again.
STATUS INDICATORS (CONTINUED) Beep Pattern Sound Meaning Low-High Tone Power On High-Low Tone Power Off High-High Tone Power Supply detected and reader started charging 1 Low Beep Reader has toggled on-screen keyboard or keyboard toggle feature is enabled (iOS devices only) 1 Beep Reader connected to device and is ready to scan tags 1 Beep Data successfully read 2 Beeps (same tone) Reader disconnected 1 Long Beep Reader gave up searching for a host 3 Beeps (escalating tone) Reader has bee
STATUS INDICATORS (CONTINUED) Vibrate Meaning Vibrate Data successfully read. Command Tags are available on pages 43-46 to modify the LED, beep, and vibrate settings. If you are using a reader-enabled application, typically the application provides settings for LED, beep, and vibrate settings.
PRODUCT SPECIFICATIONS Specifications D600 Dimensions (L x W x H) 5.2” x 1.5” x 1.6” (132.2 x 37.1 x 40.1 mm) Total Mass 3.
PRODUCT SPECIFICATIONS Specifications D600 Maximum RFID Read Range: 0.4” - 2” (10 - 50 mm) NFC/RFID front-end: NXP CLRC663 m, Carrier frequency: 13.
HELPFUL RESOURCES Technical Support & Product Registration: https://support.socketmobile.com Phone: 800-279-1390 +1-510-933-3020 (worldwide) Warranty Checker: https://www.socketmobile.com/support/warranty-checker Socket Mobile Developer Program: Learn more at: http://www.socketmobile.com/developers The User’s Guide (full installation and usage instructions) and Command Tags (Advanced Reader Configurations) can be download at: https://www.socketmobile.
SAFETY AND HANDLING INFORMATION WARNING: Failure to follow these safety instructions could result in fire or other injury or damage to the tag readers or other property. Carrying and Handling the DuraScan NFC/RFID Reader: The Socket Mobile tag reader contains sensitive components. Do not disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into this unit. Do not attempt to disassemble the product.
BLUETOOTH DEVICE UNITED STATES FCC ID: LUBD600 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BLUETOOTH DEVICE UNITED STATES FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
BLUETOOTH DEVICE CANADA IC ID: 2925A-D600 This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
BLUETOOTH DEVICE EUROPE CE Marking & European Union Compliance Products intended for sale within the European Union are marked with a CE Mark, which indicates compliance to applicable Directives and European Normes (EN), as follows.
BLUETOOTH DEVICE JAPAN Telec Marking Compliance R 211-161214 Products intended for sale within the country of Japan are marked with a Telec mark, which indicates compliance to applicable Radio Laws, Articles and Amendments.
BATTERY WARNING STATEMENTS This device contains a rechargeable Lithium-Ion battery. Stop charging DuraScan tag readers if charging isn’t completed within the normal specified time (approx. 6 hours). Stop charging the battery if the DuraScan tag reader case becomes abnormally hot, or shows signs of odor, discoloration, deformation, or abnormal conditions is detected during use, charge, or storage. Stop using the DuraScan tag reader if the enclosure is cracked, swollen or shows any other signs of mis-use.
BATTERY WARNING STATEMENTS • Dispose of used batteries in accordance with the prevailing community regulations that apply to the disposal of batteries. • Never expose this product or the battery to any liquids. • Do not shock the battery by dropping it or throwing it. If this unit shows any type of damage, such as bulging, swelling or disfigurement, discontinue use and promptly dispose. Product Disposal Your device should not be placed in municipal waste.
REGULATORY COMPLIANCE CE MARKING AND EUROPEAN UNION COMPLIANCE Testing for compliance to CE requirements was performed by an independent laboratory. The unit under test was found compliant with all the applicable Directives, 2004/108/EC and 2006/95/EC. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT The WEEE directive places an obligation on all EU-based manufacturers and importers to take-back electronic products at the end of their useful life.
LIMITED WARRANTY Socket Mobile Incorporated (Socket) warrants this product against defects in material and workmanship, under normal use and service, for one (1) year from the date of purchase. Product must be purchased new from a Socket Authorized Distributor or Reseller. Used products and products purchased through non-authorized channels are not eligible for this warranty support. Warranty benefits are in addition to rights provided under local consumer laws.
CONFIGURATION CARDS Scan configuration card(s) to quickly configure the Reader.
Extend Your Warranty... Receive Priority Service and Personal Care. You have 60 Days from purchase date to enroll in a SocketCare Service Program! For detailed information visit: https://www.socketmobile.
