Spec Sheet

HF RFID Tags
Supported:
ISO15693: ICode SL2, LRI512, my-d, Tag-It HF-I
Proprietary: ICode SLI, PicoTag (no anti-collision), Tag-It HF
ISO/IEC 14443 A and B compliant tags with all variants (Mifare, Sony FeliCA)
Compliant with EPC GEN 2 HF and ISO 18000-3 mode 3
ThinFilm: NFC Barcodes
NFC: NFCIP-1, ISO/IEC 18092) in 2 modes: reader and peer-to-peer, initiator, passive
Maximum RFID Read Range:
0.4” - 2” (10 - 50 mm)
READING PERFORMANCE
NFC/RFID front-end: NXP CLRC663
Carrier frequency: 13.56 MHz (RFID HF, NFC)
Read/Write Speed: 26 kbps (ISO 15693), 106kbps (ISO 14443, 212/424kbps (ISO 18092)
Antenna: Integrated, 28mm x 14mm, balanced
RFID READER TYPE
Battery: 1400 mAh Lithium - Ion Battery
Charge Time: 6 Hours
Battery Life -
Per Full Charge:
Active Operation: 70,000 reads
Note: Battery life varies depending on ambient temperature, read attempts, and age of battery.
BATTERY
Bluetooth Radio: Bluetooth Low Energy, version 4.2
Bluetooth Range: Up to 100 m (330 ft.) depending on environment, range limit is usually due to the Host Device
(phone, tablet or notebook)
Bluetooth Connection: Basic Mode – HID (Human Interface Device) Keyboard Emulation.
Application Mode – RDR (RFID Reader only) and PC/SC (for Read & Write) enabled by the SDK.
*Basic Mode is the Factory Reset (default) Bluetooth connection.
BLUETOOTH (WIRELESS CONNECTION)
Operating
Temperature:
-20° to 50° C (-4° to 122° F)
Storage Temperature: -40° to 70° C (-40° to 158° F)
Relative Humidity: 95% at 60° C (140° F) (non-condensing)
Sealing: IP54 (Ingress Protection rating for dust and water) EN60529
Drop Specications: Multiple 5 ft. drops to concrete
Tumble Specication: 250 cycles at 1.64 ft. (0.5 m) (500 drops), IEC60068-2-31, IEC60068-2-32
USER ENVIRONMENT
Dimensions: 5.2 (L) x 1.5 (W) x 1.6 (H) in (132.2x 37.1 x 40.1 mm)
Weight/Mass: 3.8 oz. (108g)
LEDs: Read LED: Green, Yellow, Red and Orange
Bluetooth LED: Blue
Battery LED: Green, Yellow and Red
Buttons: Trigger Button: Read & Write
Power Button: On/Off (eject on-screen keyboard)
Power Connector: EIAJ-02 DC-in Power Connector
PHYSICAL CHARACTERISTICS