Spec Sheet
Technology: 2D/1D Barcode Imager with highly visible LED aimer
Light Source: Highly Visible white LED.
Aimer: 617 nm Red LED
SCANNER TYPE
Battery: 1400 mAh Lithium - Ion Battery
Charge Time: 6 Hours
Battery Life -
Per Full Charge:
Standby time: over 30 hours
Active Scan Time: 70,000 scans within 9 hours (based on 2 scans every 1 second) or 14,000 scans within
16 hours (calculation based on 1 scan every 4 seconds)
Note: Battery life varies depending on ambient temperature, ambient light, and age of battery.
BATTERY
Supported Barcode
Symbologies:
1D Symbologies:
EAN/UPC, GS1 Databar (limited expanded & omni-directional), Code 39, Code 128, UCC/EAN 128, ISBN,
ISBT, Interleaved/Matrix/Industrial and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI, Plessey,
Telepen, postal codes (Australian Post, BPO, Canada Post, Dutch Post, Japan Post, PostNet, Sweden Post)
2D Symbologies:
Data Matrix, PDF417, Micro PDF 417, Codablock, Maxicode, QR, Aztec, HAN XIN
Scan Angle: 39° (Horizontal) - 25.5° (Vertical)
Optical Resolution: 752 (H) x 480 (V) pixels, 256 gray levels
Print Contrast: Down to 30%
Reading
Distance:
1D codes 6 to 93.6 cm (2.36 in to 36.85 in)
2D codes 5.0 to 40 cm (1.97 in to 15.75 in)
Depends on symbol size, symbology, label media, W-N ratio scan angle.
SCANNING PERFORMANCE
Bluetooth Radio: Class 1 Bluetooth, version 2.1 + EDR (Enhanced Data Rates) with 56-bit data encryption
Bluetooth Range: Up to 100 m (330 ft.) depending on environment, range limit is usually due to the Host Device (phone,
tablet or notebook)
Bluetooth Proles: Basic Mode - Human Interface Device (HID)*, Application Mode - Serial Port Prole (SPP) and Application
Mode - MFi-SPP. Some Operating Systems or smartphone/tablet models may support only one prole.
*By default, the scanner is set to Basic Mode (HID).
BLUETOOTH (WIRELESS CONNECTION)