Product Data Sheet / Brochure
Technology: 1D Class 2 Laser Barcode Scanner
Laser Power
at 650 nm :
Scanning Mode: 1.7 mW (nominal peak power)
Aiming Mode: 0.67 mW
SCANNER TYPE
Battery: 1400 mAh Lithium - Ion Battery
Charge Time: 6 Hours
Battery Life -
Per Full Charge:
Standby time: over 26 hours
Active Scan Time: 90,000 scans within 9 hours (based on 2 scans every 1 second) or 18,000 scans within
21 hours (calculation based on 1 scan every 4 seconds)
Note: Battery life varies depending on ambient temperature, ambient light, and age of battery.
BATTERY
Supported Barcode
Symbologies:
1D Symbologies:
EAN/UPC, GS1 Databar (limited expanded & omni-directional), Code 39, Code 128, UCC/EAN 128, ISBN,
ISBT, Interleaved/Matrix/Industrial and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI, Plessey,
Telepen, postal codes (Australian Post, BPO, Canada Post, Dutch Post, Japan Post, PostNet, Sweden Post)
Scan Angle: Wide: 47° (Default)
Medium: 35°
Narrow: 10°
Optical Resolution: 0.005 in. Minimum element width
Print Contrast: Minimum 25% absolute dark/light
Relfectance measured at 650 nm
Reading
Distance:
1D codes 2.6 to 254.0 cm (1 in to 100 in)
Depends on width & barcode size, symbology, label media, W-N ratio scan angle
SCANNING PERFORMANCE
Bluetooth Radio: Class 1 Bluetooth, version 2.1 + EDR (Enhanced Data Rates) with 56-bit data encryption
Bluetooth Range: Up to 100 m (330 ft.) depending on environment, range limit is usually due to the Host Device (phone,
tablet or notebook)
Bluetooth Proles: Basic Mode - Human Interface Device (HID)*, Application Mode - Serial Port Prole (SPP) and Application
Mode - MFi-SPP. Some Operating Systems or smartphone/tablet models may support only one prole.
*By default, the scanner is set to Basic Mode (HID).
BLUETOOTH (WIRELESS CONNECTION)