Owners manual

Note: This procedure will put the scanner in discoverable mode.
Step 1: Unpairing the scanner: Delete the Bluetooth Pairing
If the scanner is paired with a device, unpair it before trying to
connect to a different device.
a. Power on the scanner.
b. Press the trigger button, then presss the power button and hold both
until you hear 3 beeps.
The scanner will unpair and automatically power off. The next time you
power on the scanner, it will be discoverable.
Step 2: Remove and/or forget the scanner from the Bluetooth list on
the host device in Settings>Bluetooth.
Important: Both steps above must be done to complete
the unpairing process.
22
BLUETOOTH UNPAIRING