Owners manual

BASIC MODE

Windows: Connect Windows PC

1. Power on the scanner. Make sure the scanner is discoverable (un-

paired).

2. Use your computer’s Bluetooth Settings to connect to the scanner.

3. Select “Add a device”.

4. In the device list, select Socket D700[xxxxxx]. Click Next.

5. If a passkey is requested, enter 0000 (four zeroes). Click OK.

6. Follow the remaining screens to complete the wizard.

Note: On some computers the DuraScan will have to be congured as a

peripheral class of device. Please, refer to the Command Sheet Barcode

for details.