Owners manual

Apple: Connect Apple iOS Device or Mac OS Device in Basic Mode

In this mode the scanner functions and communicates similar to a key-

board. Therefore, scanner will work with Safari, Notes, and any other

application that support an active cursor.

1. Power on the scanner. Make sure the scanner is

discoverable (unpaired). The Blue light blinks fast.

2. Start a Bluetooth device search.

• Settings | Bluetooth: Turn on Bluetooth and search for device.

• Mac OS: Click System Preferences | Bluetooth. A Bluetooth device

search will begin.

3. In the device list, tap on D700 [xxxxxx].

4. The scanner will connect to the Apple device.

5. The scanner will beep once after it has connected.

Now you are ready to scan barcodes!

To use the virtual keyboard while the scanner is connected, double tap on

the power button (similar to double clicking a mouse).

To connect to a new device or use a different prole (mode) on the

same device, you must rst unpair the scanner (see page 22).

BASIC MODE