Spec Sheet
Technology: 1D Barcode Linear Imager
SCANNER TYPE
Battery: 1400 mAh Lithium - Ion Battery
Charge Time: 6 Hours
Battery Life:
Per Full Charge:
Standby time: over 26 hours
Active Scan Time: 106,000 scans within 10 hours (based on 2 scans every 1 second) or 17,000 scans within
19 hours (calculation based on 1 scan every 4 seconds)
Note: Battery life varies depending on ambient temperature, ambient light, age of battery, etc.
BATTERY
Supported Barcode
Symbologies:
1D Symbologies: Bookland EAN (ISBN / EAN-13), Chinese 2 of 5, Codabar, Code 11, Code 128, Code 39,
Code 93, Coupon Report, Discrete 2 of 5, GS1 DataBar (RSS), GS1-128 (UCC-128/EAN-128), Interleaved
2 of 5 (ITF-14), Inverse 1D, ISBT concatenations, ISSN EAN, Matrix 2 of 5, MSI, Plessey, UPC/EAN, UPC/
EAN/JAN supplemental redundancy
Scan Angle: 53.3” ± 3”
Optical Resolution: 5 mil minimum
Print Contrast: 20% minimum
Reading
Distance:
1D codes 5.7 to 50.8 cm (2.25 to 20 in) Resolution
Depends on symbol size, symbology, label media, W-N ratio scan angle
SCANNING PERFORMANCE
Bluetooth Radio: Class 1 Bluetooth, version 2.1 + EDR (Enhanced Data Rates) with 56-bit data encryption
Bluetooth Range: Up to 100 m (330 ft.) depending on environment, range limit is usually due to the Host Device (phone,
tablet or notebook)
Bluetooth Proles: Basic Mode - Human Interface Device (HID)*, Application Mode - Serial Port Prole (SPP) and Application
Mode - MFi-SPP. Some Operating Systems or smartphone/tablet models may support only one prole.
*By default, the scanner is set to Basic Mode (HID).
BLUETOOTH (WIRELESS CONNECTION)