Spec Sheet
Technology: 1D Barcode Linear Imager
SCANNER TYPE
Battery: Lithium ion rechargeable battery
Charge Time: 4 Hours
Battery Life:
Per Full Charge:
Standby time: 21 hours
Active Scan Time: 8,000 scans within 9 hours (based on 1 scan every 4 seconds)
49,000 scans within 4 hours (based on 2 scans every second)
Note: Battery life varies depending on ambient temperature, ambient light, age of battery, etc.
BATTERY
Default Barcode
Symbologies:
CODE 39, CODE 128, EAN 8, EAN 13, GS1 DATABAR, GS1 DATABAR EXPANDED STACKED, GS1 DATABAR
EXTENDED, GS1 DATABAR LIMITED, INTERLEAVED 2 OF 5, ISBT 128, UPC A, UPC E (0)
Supported Barcode
Symbologies:
1D Symbologies: BOOKLAND EAN, Codabar, CODE 39, CODE 39 ASCII (EXTENDED), CODE 39 Trioptic, CODE
93, CODE 128, DISCRETE 2 OF 5, EAN 8, EAN 13, EAN 128, EAN 128 + COMPOSITE, EAN-UCC 128, GS1 128,
GS1 DataBar-14, GS1 DATABAR, GS1 DATABAR EXPANDED STACKED, GS1 DATABAR EXTENDED, GS1 DATABAR
LIMITED, INTERLEAVED 2 OF 5, ISBT 128, KOREAN 3 OF 5, MATRIX 2 OF 5, MSI , PLESSEY, RSS EXPANDED
STACKED, RSS-14, TELEPEN, UPC A, UPC E (0), UPC E1
Scan Angle: 53.3” ± 3”
Optical Resolution: 5 mil minimum
Print Contrast: 20% minimum
Reading
Distance:
1D codes 5.7 to 50.8 cm (2.25 to 20 in) Resolution
Depends on symbol size, symbology, label media, W-N ratio scan angle
SCANNING PERFORMANCE
Bluetooth Radio: Class 2 Bluetooth, version 2.1 + EDR (Enhanced Data Rates) with 56-bit data encryption
Bluetooth Range: Up to 10 m (33 ft.) depending on environment, range limit is usually due to the Host Device (phone,
tablet or notebook)
Bluetooth Proles: Basic Mode - Human Interface Device (HID)*, Application Mode - Serial Port Prole (SPP) and Application
Mode - MFi-SPP. Some Operating Systems or smartphone/tablet models may support only one prole.
*By default, the scanner is set to Basic Mode (HID).
BLUETOOTH (WIRELESS CONNECTION)