User's Manual

CHAPTER 3: SETUP FOR WINDOWS MOBILE 63
Using ActivePairing by Creating a “Permanent Pair”:
1. Connect the computer and Bluetooth CRS using the instructions
in Chapter 3 or 4.
2. Windows XP/Vista only: Use your Bluetooth software to identify
the COM port assigned to the Bluetooth CRS for an incoming
Bluetooth connection.
3. In the SocketScan utility, enter the following settings:
• Windows Mobile: In the CS HW tab, tap Advanced. Select the
Permanent Pair checkbox. Tap OK. Tap ok to save.
• Windows XP/Vista:
− In the CS tab, select Enable Cordless Scanner support
and Enable ActivePairing. For Port, select the Incoming
Bluetooth COM port for the Bluetooth CRS.
− Click Advanced… Select Permanent Pair and click
Change. Select Permanent Pair. Click OK. Click OK.
Click Close. Click OK.