User's Manual

CHAPTER 3: SETUP FOR WINDOWS MOBILE 61
• Port: Select the Incoming
Bluetooth COM port for the CRS.
Click OK.
8. Check the SocketScan task tray icon to make sure it indicates it
is ready for ActivePairing.
• Windows Mobile: In the Today screen, make sure the
SocketScan icon in the task tray has a blue circle.
• Windows XP/Vista: There should be an animated “spinning”
icon.
9. Turn on the Bluetooth CRS and scan the Initiator Bar Code.
Note: It may take several seconds for the Bluetooth CRS to connect to
the mobile device. The
Bluetooth CRS will try to connect every 2
seconds for a maximum of 20 attempts.
10. After connecting, the Bluetooth CRS will beep once, and the
Bluetooth Status LED of the Bluetooth CRS will blink once every
3 seconds.
11. To disconnect, click on the SocketScan icon. In the pop-up menu,
click Disconnect CS. Alternatively, simply turn off the Bluetooth
CRS.
Notes: