User's Manual

CHAPTER 4: SETUP FOR WINDOWS XP & WINDOWS VISTA 43
Broadcom (Widcomm) Bluetooth Stack:
1. Click the Bluetooth icon in the task tray. Click Quick Connect |
Bluetooth Serial Port | Find Devices.
Note: Be sure to connect to the Bluetooth CRS via Quick Connect
because this sets the
Bluetooth CRS as your default Bluetooth serial
device.
2. After the device search, select the CRS, which will appear as
Socket CRS [xxxxxx].
Note: The characters in brackets are the last 6 characters of the
Bluetooth Device Address, which is printed on a label under the wrist
unit.
3. If a passkey is requested, enter 1234.
4. To indicate the connection, the Bluetooth CRS will beep once.
The blue LED will also blink off once per second.
Note: By default, the Bluetooth software asks for the passkey each time
you connect.
Note: To disable the passkey requirement, under Advanced
Configuration, disable the Secure Connection requirement for both the
Local Service and Client Application, then unpair the devices. Refer to
the documentation for your Bluetooth hardware/software for complete
instructions.