User's Manual

4. Tap to select your Bluetooth CRS and tap ok.

Note: To help you identify the Bluetooth CRS, Connect!Agent reports the

Bluetooth Device Address, which is labeled on the bottom of the wrist unit.

The characters in brackets are the last six characters.

5. Connect!Agent will connect to the selected Bluetooth CRS.

6. After connecting, the Bluetooth CRS will beep once, and the

SocketScan icon will change into a ring icon.

Note: Connect!Agent will save information to automate future connections

to the

Bluetooth CRS. To change which Bluetooth CRS is assigned as

your favorite, use the Connect!Agent utility (instructions provided at the

end of this chapter).

Note; After you have connected the device to the Bluetooth CRS, you

can use ActivePairing for future connections. Please refer to the

instructions later in the chapter.