User's Manual

Bluetooth Connection – Apple – HID Mode
Connect your CHS with an Apple device using HID mode.
(This is the default mode.)
1. Power on the CHS.
2. Set the CHS to HID mode using the barcode on page 10.
3. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
4. Select Socket CHS in the list of found devices.
5. Tap Pair if prompted.
6. The CHS will beep once to confirm connection.
Now you are ready to scan barcodes in HID mode using your Apple device!
Bluetooth Connection – Apple – iOS Mode
Connect your CHS with an Apple device using iOS mode.
(This is required only the first time you connect.)
1. Power on the CHS.
2. Set the CHS to iOS mode using the barcode on page 9.
3. Enable Bluetooth on the Apple device. A Bluetooth device search will begin.
4. Select Socket CHS in the list of found devices.
5. Tap Pair if prompted.
6. The CHS will beep once to confirm connection.
Now you are ready to scan barcodes in iOS mode using your Apple device!
Use Scanner Settings (available at the App Store - http://www.socketmobile.com/appstore) or
another compatible application developed with the SocketScan SDK on your Apple device.
See page 15 of chs 1d imager manual