User's Manual
Table Of Contents
- 0BCopyright Notice
- 1B1 | Introduction
- 2B2 | Scanner Setup
- 3B3 | Setup for Windows PC
- 4B4 | Setup for Windows Mobile
- 5B5 | Setup for Apple
- 7B6 | Setup for Android
- 7 | Setup for BlackBerry
- Appendix A Specifications
- 8BAppendix B Safety and Usage Tips
- 9BAppendix C Barcode Label Specifications
- 10BAppendix D Decode Zone
- 11B10BAppendix E Command Barcodes
- Appendix F Special Button Sequences
- Appendix G CAB Installation
- Appendix H Troubleshooting
- 12BAppendix I Technical Support
- 13BLimited Warranty
- SocketScan Software License Agreement
- 14BRegulatory Compliance
CHAPTER 7: SETUP FOR BLACKBERRY 71
7 | SETUP FOR BLACKBERRY
This chapter explains how to install and use the Bluetooth
Cordless Hand Scanner (CHS) with one of the following
BlackBerry devices:
• BlackBerry® Bold 9700 Smartphone running BlackBerry OS
5.0.0.714 or later. Other models have not been tested with
SocketScan 10 and may require a previous software
version. Works in Bluetooth SPP mode only.
• BlackBerry PlayBook running QNX. Works in Bluetooth HID
mode only.
Before you begin the instructions in this chapter, make sure
you have charged the scanner, as described in Chapter 2,
“Scanner Setup”
HID only versions of the CHS7X or 7XRx (Revisions A-C) are not
compatible with BlackBerry OS. All revisions of the 7Xi and 7XiRx work
with BlackBerry OS.