User's Manual

CHAPTER 5: SETUP FOR APPLE 53
OPTION 2: USING THE CHS IN IOS MODE
The only CHS versions compatible with Apple iOS mode (equivalent to SPP
mode) are the 7Xi
and 7XiRx. In iOS mode, the CHS can only scan barcodes
into applications developed with the SocketScan 10 SDK.
The CHS 7Xi and 7XiRx are made for the following Apple devices:
o iPod touch (4
th
generation)
o iPod touch (3
rd
generation)
o iPhone 4
o iPhone 3GS
o iPhone 3G
o iPad2
o iPad
To learn more about compatible applications available in the App Store
™
online store:
o See a list of apps on the Socket website (coming soon)
o Contact your enterprise solution provider, who can also help install and set
up your iOS compatible application.
To purchase the SDK, please visit: http://www.socketmobile.com/products/sdk/
o CD only: SKU# SW1244-1321
o CD with scanner bundle: SKU# SW1245-1322
To pair and connect the CHS and Apple device:
You only need to pair the CHS with your Apple device the first time you
try to connect.
The correct Bluetooth connection procedure may vary depending on
which application you are using. Please refer to your application
documentation for more information. Internet access may be required.
The CHS needs to be configured for iOS mode. Your application may
have specific instructions for configuring the CHS. Otherwise you can use
the Command Barcode for iOS mode in Appendix E
.
1. Power on the CHS. Press and hold the small power button until the LED turns
blue and the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is on
but not connected.