User's Manual

36
OPTION 2: USING THE CHS IN SPP MODE
Note: The HID only versions (Revisions A-C) of the CHS 7X and 7XRx do not support SPP
mode. All revisions of the 7Xi and 7XiRx support SPP mode.
To install SocketScan 10 software:
If you have the Socket SoMo
®
650 running Windows Mobile 6 Service Pack 8 or later,
SocketScan 10 is pre-loaded. To install, in the Today screen, tap Getting Started.
Advanced Users: See Appendix G for CAB file installation instructions.
1. Make an active connection between your PDA and a host PC. Use a USB / serial connection
cable or cradle and Windows Mobile Device Center or ActiveSync, free from Microsoft.
http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/installing-wmdc.aspx
2. Make sure Bluetooth is enabled on your PDA.
3. Access the SocketScan 10 installation file, either from the Socket website or the
SocketScan 10 installation CD.
• To install from a web download (recommended to ensure the latest software):
− Open: http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
− Click on the link for the exe file.
• To install from the SocketScan 10 installation CD:
− Insert the CD into the CD drive of your computer. It should auto-run.
(If the CD does not auto-run, use My Computer or File Explorer to access your
CD drive and click on setup.exe)
− In the Getting Started with SocketScan wizard, click on the Installation link on
the left side. Scroll down to the section for Windows Desktop and click Install.