User's Manual

34
7. In the device list, tap Socket CHS 7x or Socket 7Xi.
In the device search, the CHS will appear as Socket CHS 7x [xxxxxx] for the
7X and 7XRx or Socket 7Xi [xxxxxx] for the 7Xi and 7XiRx. The characters in
brackets are the last six characters of the CHS Bluetooth Device Address
(BDA), which is labeled inside the battery compartment.
8. When prompted for a passcode, enter 0000 (four zeroes). Tap Next.
9. After the SoMo connects to the CHS, tap Done.
The CHS will beep once after it has connected and is ready to scan
barcodes. The LED will also blink blue once every 3 seconds.
10. The CHS will now appear in the Bluetooth devices list. Tap ok.
11. Tap X to close the Connections screen.