User's Manual
Table Of Contents
- 0BCopyright Notice
- 1B1 | Introduction
- 2B2 | Scanner Setup
- 3B3 | Setup for Windows PC
- 4B4 | Setup for Windows Mobile
- 5B5 | Setup for Apple
- 7B6 | Setup for Android
- 7 | Setup for BlackBerry
- Appendix A Specifications
- 8BAppendix B Safety and Usage Tips
- 9BAppendix C Barcode Label Specifications
- 10BAppendix D Decode Zone
- 11B10BAppendix E Command Barcodes
- Appendix F Special Button Sequences
- Appendix G CAB Installation
- Appendix H Troubleshooting
- 12BAppendix I Technical Support
- 13BLimited Warranty
- SocketScan Software License Agreement
- 14BRegulatory Compliance
18
OPTION 2: USING THE CHS IN SPP MODE
Note: The HID only versions (Revisions A-C
) of the CHS 7X and 7XRx do not
support SPP mode. All revisions of the 7Xi and 7XiRx support SPP mode.
To install SocketScan 10 software:
1. Access the SocketScan 10 installation file, either from the Socket website or the
SocketScan 10 installation CD.
• To install from a web download (recommended to ensure the latest software)
− Open: http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
− Click on the link for the exe file.
• To install from the SocketScan 10 installation CD:
− Insert the CD into the CD drive of your computer. It should auto-run.
(If the CD does not auto-run, use My Computer or File Explorer to access your
CD drive and click on setup.exe)
− In the Getting Started with SocketScan 10 wizard, click on the Installation link on
the left side. Scroll down to the section for Windows Desktop and click Install.
2. Download and run the installation file.
• Internet Explorer: In the Security Warning screens, click Run. When asked if
you want to run the file, click Run.